Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Connect the Mini Computer on Jeep Renegade

Model: Jeep Renegade 520, MK 1, BU - Years 2014-2026
Part: Checks and maintenance

Let's see how to connect the mini computer to reset the warning light on a Jeep Renegade. Open the car door and sit in the driver's seat: connect the mini PC clamp to the socket at the bottom left of the dashboard. Once connected, check the car's system with the mini PC. After all necessary checks to reset the car's maintenance light, disconnect the mini PC cable from the previously connected socket at the end of the reset. Check and reset all warning lights on the instrument panel.

Updated on 19 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Light on a 2021 Jeep Renegade
How to Reset the Oil Light on a 2021 Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) In this new guide dedicated to your 2021 Jeep Renegade, you will discover the various steps to manually reset the engine oil light that continues to …
How to Replace the Cabin Air Filter on the Jeep Renegade
How to Replace the Cabin Air Filter on the Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) In this mini guide, discover the steps to independently change the cabin air filter in your Jeep Renegade. First, go to the passenger side and leave …
How to replace the air filter of the Jeep Renegade
How to replace the air filter of the Jeep Renegade
Jeep Renegade (2014-2023 / ) In this new mini guide of ours, we will discover together the various steps that you need to follow if you want to replace the engine air filter of y…

Other guides you may be interested in

    Frequently Asked Questions

    • Jeep Renegade 2014-2026 - What does the "side distance warning not available" message mean in the Jeep Renegade? Read answer
    • Jeep Renegade 2014-2026 - How to deactivate the Start / Stop in the Jeep Renegade? Read answer
    • Jeep Renegade 2014-2026 - What does the Jeep Renegade "Start & Stop not available" mean? Read answer

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos