Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the Fuel Filter on the Jeep Cherokee KL?

Model: Jeep Cherokee KL, MK 5 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Diesel fuel filter

See other generations:
Video tutorial

This short video clearly shows the exact procedure for replacing the diesel filter on your Jeep Cherokee KL. First, you should know that there are actually two filters positioned side by side, as seen in the video. You will need to lift the car and secure it with axle stands.

The position of the filters is approximately halfway and underneath the car, as shown in the video. Now, unscrew the bleed valve of the pump, then proceed to unscrew one filter and then the other, replacing them.

Finally, perform this procedure: press the ignition button twice without pressing the brake pedal, wait 30 seconds, and turn off. Repeat this process twice, then start the engine, and you will have completed the task.


Updated on 16 April 2026 by ScegliAuto


Related tutorials

How to Replace the Fuel Filter on the Jeep Cherokee XJ
How to Replace the Fuel Filter on the Jeep Cherokee XJ
Jeep Cherokee (1984-2001 / MK 2, XJ) In today's tutorial video, learn how to remove and replace the fuel filter on the second series Jeep Cherokee XJ in simple and quick steps. First, li…
How to Replace the Fuel Filter on a Jeep Cherokee?
How to Replace the Fuel Filter on a Jeep Cherokee?
Jeep Cherokee (1984-2001 / MK 2, XJ) In this video, see how to replace the fuel filter on a Jeep Cherokee, a very simple and quick operation. First, open the fuel tank cap to release som…
How to Open the Fuel Flap on the Jeep Cherokee?
How to Open the Fuel Flap on the Jeep Cherokee?
Jeep Cherokee (2013-2023 / KL, MK 5) To open the fuel flap on the Jeep Cherokee, press the button located in the centre of the driver's door, just below the internal handle: pressing thi…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos