Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassemble the fuse box on a Jeep Cherokee

Model: Jeep Cherokee MK 2, XJ - Years 1984-2001
Part: Fuse box

Do we want to remove the fuse box of a Jeep Cherokee? Let's see how to disassemble the container where the car operating fuses are stored. We open the car door, pull up the engine compartment opening lever located at the bottom left of the dashboard and lift up the front hood, we secure the same. With a screwdriver, remove the cap placed next to the car power supply battery, remove it from the fuse box. Once the box has been discovered, let's get ready to unscrew the tightening screws on the sides. We remove the fuse holder. We fit a new container and replace all the fuses.

Posted on 3 August 2021 by ScegliAuto

Video tutorial

Related tutorials

Where is the fuse box for the engine of the Jeep Cherokee located?
Where is the fuse box for the engine of the Jeep Cherokee located?
Jeep Cherokee (2013-2023 / MK 5, KL) To locate the fuse box of the engine of your third edition Jeep Cherokee, you must follow the steps described in the following guide. First of all, t…
Where is the fuse box located in the Jeep Cherokee
Where is the fuse box located in the Jeep Cherokee
Jeep Cherokee (2013-2023 / MK 5, KL) If you own a Jeep Cherokee and want to find out where the fuse box is located in the cabin, all you have to do is follow the procedure described in t…
Where is the fuse box for the engine of the Jeep Cherokee 5 located?
Where is the fuse box for the engine of the Jeep Cherokee 5 located?
Jeep Cherokee (2013-2023 / MK 5, KL) In this new guide aimed at all of you who own a Jeep Cherokee Mk5, we will explain the steps you need to take in order to locate the engine fuse box.…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos