Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Cherokee
    4. : How to replace the headlight bulb on a Jeep Cherokee

Jeep Cherokee - Video tutorial

Model: Jeep Cherokee MK 3, KJ - Years 2002-2007
Part: Headlight bulb
Operation: How to replace the headlight bulb on a Jeep Cherokee

Before we can start we will have to open the hood. Let's start by disassembling the front bezel, unscrewing the three upper screws that secure it, then lift it and remove it. Once the mask has been removed, we will have direct access to the screws that secure the headlight, which must be unscrewed and removed, freeing the headlight. Once the headlight is free, we will have to remove a rubber cover of the bulb placed in the rear side of the headlight. After that, the bulb will only be fixed by two clips, which we will have to remove. Once these two clips are removed, we can remove the burnt out bulb. Subsequently, to mount the new bulb and reassemble everything, simply follow the steps in reverse, and we will have successfully completed the replacement.


Posted on 29 February 2024 by ScegliAuto



How to replace the headlight bulb on the Jeep Cherokee?
Jeep Cherokee (2013-2023 / MK 5, KL) In order to replace the Jeep Cherokee headlight bulbs, you need to lift the hood and remove the air filter to access the right bulb and the battery t
How to replace the headlight bulb on 2016 Jeep Cherokee
Jeep Cherokee (2013-2023 / MK 5, KL) Let's see how to remove and replace the headlight bulb on a 2016 Jeep Cherokee, fourth series, in simple and quick steps. To access the headlight bul
How to replace the headlight bulb on the Jeep Grand Cherokee?
Jeep Cherokee (2008-2012 / KK, MK 4) In order to replace the headlight bulb of the Jeep Grand Cherokee you have to go to lift the hood to have access to the engine compartment. Once open

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos