Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the oil service light in the Jeep Cherokee?

Model: Jeep Cherokee KL, MK 5 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Service warning light

See other generations:
Video tutorial

In this video, you can see how to reset the oil service warning light on the Jeep Cherokee, an operation to be performed only after completing the scheduled maintenance as outlined in the manual. To do this, press the ignition button twice to turn on the instrument cluster and hold down the brake pedal.

At the same time, fully press the accelerator pedal five times. At this point, the service light has been reset, but you can turn off and on the instrument cluster again to verify that the procedure was successful.


Updated on 4 May 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on the Jeep Cherokee
How to Reset the Service Light on the Jeep Cherokee
Jeep Cherokee (2013-2023 / KL, MK 5) Today's steps will show you how to reset the engine oil light (service) on the Jeep Cherokee. First, get into the vehicle and start by turning on the…
How to Reset the Service Light on a Jeep Cherokee?
How to Reset the Service Light on a Jeep Cherokee?
Jeep Cherokee (2013-2023 / KL, MK 5) To reset the Service light on the Jeep Cherokee, insert the ignition key, turning it in the ignition switch, and then press the button to start the i…
How to Reset the Oil Warning Light on a Jeep Cherokee
How to Reset the Oil Warning Light on a Jeep Cherokee
Jeep Cherokee (2008-2012 / MK 4, KK) Resetting the service light on the Jeep Cherokee is a very simple operation that can be done independently, aided by our video tutorial. To reset the…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos