Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Jeep Cherokee

Model: Jeep Cherokee KL, MK 5 - Years 2013-2023
Part: Service warning light

Today's steps will show you how to reset the engine oil light (service) on the Jeep Cherokee. First, get into the vehicle and start by turning on the instrument panel by turning the key to position two; then press the accelerator pedal three times, as illustrated in the video. At this point, turn off the instrument panel and turn it back on, waiting for the service light reset process to complete, definitively resetting the engine oil life light that appears on the instrument panel display!

Updated on 7 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Jeep Cherokee
How to Reset the Service Light on a Jeep Cherokee
Jeep Cherokee (2013-2023 / KL, MK 5) In this video, you will learn how to reset the service light on a Jeep Cherokee of the latest series. First, position yourself in the driver's seat a…
How to reset the service in the Jeep Cherokee?
How to reset the service in the Jeep Cherokee?
Jeep Cherokee (2013-2023 / KL, MK 5) In this tutorial, we will see how to reset the service light in the Jeep Cherokee, a very simple and quick operation to be performed only after compl…
How to reset the service light on the Jeep Cherokee?
How to reset the service light on the Jeep Cherokee?
Jeep Cherokee (2013-2023 / KL, MK 5) Resetting the service in the Jeep Cherokee, as we can see in this tutorial, is an extremely simple and quick operation. Before proceeding, we must ha…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos