Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Engine Oil and Oil Filter of the Jeep Cherokee 2.4L

Model: Jeep Cherokee KL, MK 5 - Years 2013-2023
Part: Engine oil

To ensure proper functioning over time, it is necessary to regularly change the engine oil and oil filter; let's see how to service the Jeep Cherokee 2.4L. First, lift the vehicle and begin draining the engine oil by unscrewing the drain bolt located underneath the engine (using a socket spanner); let it drain into a container for about ten minutes. At this point, unscrew and replace the oil filter cartridge with a new one, tightening it by hand gently; finally, pour in the new oil!

Updated on 25 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Jeep Cherokee (2013-2023 / KL, MK 5) Discover the steps to perform the routine maintenance service for changing the oil and oil filter on the Jeep Cherokee with a 3.6-litre V6 engine. Fi…
Jeep Cherokee (2013-2023 / KL, MK 5) In this video, discover the DIY procedure for changing the oil in a Jeep Cherokee. Start by removing the plastic panel covering the oil cap, as shown…
Jeep Cherokee (2013-2023 / KL, MK 5) If you have just changed the oil and filter in your Jeep Cherokee and notice the warning light on the display, don't worry as you can perform a simpl…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos