Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Engine Oil and Oil Filter on the Jeep Cherokee 3.2 V6

Model: Jeep Cherokee KL, MK 5 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Engine oil

See other generations:
Video tutorial

Discover the steps to perform the routine maintenance service for changing the oil and oil filter on the Jeep Cherokee with a 3.6-litre V6 engine. First, lift the vehicle and start by unscrewing the drain bolt located under the engine using a socket spanner; let the oil drain into a container for about ten minutes.

Next, open the bonnet and unscrew the oil filter cover; remove and replace the cartridge with a new one, tightening gently. Finally, pour in the new engine oil!


Updated on 7 May 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil and Oil Filter of the Jeep Cherokee 2.4L
How to Change the Engine Oil and Oil Filter of the Jeep Cherokee 2.4L
Jeep Cherokee (2013-2023 / KL, MK 5) To ensure proper functioning over time, it is necessary to regularly change the engine oil and oil filter; let's see how to service the Jeep Cherokee…
How to Change Engine Oil in a Jeep Cherokee
How to Change Engine Oil in a Jeep Cherokee
Jeep Cherokee (2013-2023 / KL, MK 5) In this video, discover the DIY procedure for changing the oil in a Jeep Cherokee. Start by removing the plastic panel covering the oil cap, as shown…
How to Reset the Oil Light on the Jeep Cherokee
How to Reset the Oil Light on the Jeep Cherokee
Jeep Cherokee (2013-2023 / KL, MK 5) If you have just changed the oil and filter in your Jeep Cherokee and notice the warning light on the display, don't worry as you can perform a simpl…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos