Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change Engine Oil in a Jeep Cherokee

Model: Jeep Cherokee KL, MK 5 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Engine oil

See other generations:
Video tutorial

In this video, discover the DIY procedure for changing the oil in a Jeep Cherokee. Start by removing the plastic panel covering the oil cap, as shown at minute 0:45. Once removed, you can access the oil cap and loosen it slightly with a 30 millimetre spanner, just enough to unlock it. Next, place a container under the cap and fully remove the previously loosened cap. At this point, the oil will start to flow out. Once the draining procedure is complete, simply refit the cap and close the panel again.

Now, open the bonnet and add new oil to the engine.


Updated on 10 May 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil and Oil Filter of the Jeep Cherokee 2.4L
How to Change the Engine Oil and Oil Filter of the Jeep Cherokee 2.4L
Jeep Cherokee (2013-2023 / KL, MK 5) To ensure proper functioning over time, it is necessary to regularly change the engine oil and oil filter; let's see how to service the Jeep Cherokee…
How to Replace the Engine Oil and Oil Filter on the Jeep Cherokee 3.2 V6
How to Replace the Engine Oil and Oil Filter on the Jeep Cherokee 3.2 V6
Jeep Cherokee (2013-2023 / KL, MK 5) Discover the steps to perform the routine maintenance service for changing the oil and oil filter on the Jeep Cherokee with a 3.6-litre V6 engine. Fi…
…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos