Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Compass
    4. : Cabin air filter replacement

Jeep Compass - Video tutorial

Model: Jeep Compass MK 49, MK 1 - Years 2006-2016
Part: Cabin air filter
Operation: Cabin air filter replacement

The cabin air filter box is located on the passenger side, just behind the glove box. To be able to install the new filter it is therefore necessary to open the door of the glove compartment, press on the sides so as to make the stop pins retract, lower the door completely and access the filter box. Then release the lateral fixing tabs of the filter box cap, remove it and extract the old filter; make sure there are no impurities inside and apply the new filter respecting the direction of the air flow. Then fit the cap and reattach the glovebox door.


Posted on 30 July 2023 by ScegliAuto



Jeep Compass air conditioning filter replacement
Jeep Compass (2006-2016 / MK 49, MK 1) .. Jeep Compass cabin air filter replacement? Let's see how the air filter is removed. We open the glove box, unhook..
Jeep Compass air conditioning filter replacement
Jeep Compass (2006-2016 / MK 49, MK 1) The replacement of the cabin air filter is a maintenance that should not be neglected at all since an efficient filter will prevent bad smells inside
Jeep Compass pollen filter replacement year 2018
Jeep Compass (2016-2024 / 552, MK 2) How to remove the air filter of a jeep Compass year 2018? Let's see how the pollen air filter is removed from inside the cover drawer. Peel off the c

Other guides that may interest you

    Frequently Asked Questions

    • Compass 2016-2025 - Where is the cabin filter located in a Jeep Compass? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos