Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Remote Battery on a Jeep Grand Cherokee MK4

Model: Jeep Grand Cherokee WK2, MK 4 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Key

See other generations:
Video tutorial

In today's video, we will see instructions on how to change the battery in the electronic key remote for the Jeep Grand Cherokee fourth series. Take your remote and start prying open the side with something thin to separate it into two parts; then remove the battery found inside, as shown in the video.

At this point, replace the battery with a new one of the correct type (in this case, a CR 2032); simply insert it the right way round and reassemble the two halves of the remote, following the video to the end!


Updated on 26 May 2026 by ScegliAuto


Related tutorials

How to Open the Remote of a Jeep Grand Cherokee
How to Open the Remote of a Jeep Grand Cherokee
Jeep Grand Cherokee (1998-2004 / MK 2, WJ) Is the remote battery of your Jeep Grand Cherokee flat? Here’s how to open it to replace the battery. Take the Grand Cherokee remote and, using a scr…
How to change the battery in the Jeep Grand Cherokee remote control
How to change the battery in the Jeep Grand Cherokee remote control
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) On the Jeep Grand Cherokee, when the remote control starts to lose range or indicates a low battery, you can replace the battery in a few minutes. Wo…
Replacing the Remote Key Battery for a Jeep Grand Cherokee
Replacing the Remote Key Battery for a Jeep Grand Cherokee
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) In this tutorial video, you will see how to disassemble and replace the battery of the remote key for a Jeep Grand Cherokee. Take your remote in hand…

Where to Find and How to Remove the Spare Wheel of a Peugeot 5008?

The spare wheel of a Peugeot 5008 is located under the rear of the vehicle. To remove it, you need to lift the third row of seats to access the fixing bolt that holds the spare wheel in position. Using the correct spanner, proceed to unscrew the fixing bolt until the wheel is no longer secured. At this point, you can extract the spare wheel from underneath the vehicle. Once you have completed this step, you are free to fit the spare wheel. Ensure you correctly remount the spare wheel and securely tighten the fixing bolt when you are finished.

Watch the video!


by ScegliAuto

More videos