Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Cherokee
    4. : How to replace the headlight bulbs on the Jeep Cherokee?

Jeep Cherokee - Video tutorial

Model: Jeep Cherokee XJ, MK 2 - Years 1984-2001
Part: Headlight bulb
Operation: How to replace the headlight bulbs on the Jeep Cherokee?

In the attached video tutorial we can see how to replace the headlight bulbs in the Jeep Cherokee XJ. This is a very simple operation, we only need a Phillips screwdriver. To access the bulb, you must first remove the external frame by unscrewing the two upper screws and disengaging the lower internal clips. At this point, unscrew the four fixing screws of the headlight, disconnect the connector and extract it. Finally, we replace the bulb, reassemble everything following the reverse procedure and repeat the operation for the opposite headlight, if necessary.


Posted on 31 May 2024 by ScegliAuto



How to replace the headlight bulb on the Jeep Cherokee?
Jeep Cherokee (2013-2023 / MK 5, KL) In order to replace the Jeep Cherokee headlight bulbs, you need to lift the hood and remove the air filter to access the right bulb and the battery t
How to replace the headlight bulbs of the Jeep Cherokee Mk5
Jeep Cherokee (2013-2023 / MK 5, KL) .. The guide shows how to replace the headlight bulbs on the Jeep Cherokee Mk5. As a first step it is necessary to have..
How to replace the rear light bulb on the Jeep Cherokee?
Jeep Cherokee (2013-2023 / MK 5, KL) In order to replace the rear light bulbs of the Jeep Cherokee you need to open the tailgate of the luggage compartment, so that you can loosen the sc

How to activate the cruise control of the Nissan Qashqai

Let's see how the cruise control is activated on the Nissan Qashqai: you have to activate it by putting the cruise control switch to "on", then, using only the right spoke of the steering wheel, press the "set-" button, then the "res +" button also on the right spoke of the steering wheel and the cruise control indicator lights up on the car's instrument panel display. If the brake pedal is pressed while the cruise control is in operation or if the "cancel" button on the right spoke of the steering wheel is pressed, the cruise control will automatically deactivate and the cruise control indicator on the instrument panel will go out.

Watch the video!


by ScegliAuto

More videos