Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Tyre Pressure on a Jeep Compass

Model: Jeep Compass MK 49, MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Tire pressure warning light

See other generations:
Video tutorial

Remember that the air pressure in the tyres increases during rolling. Additionally, the pressure sensors inside the wheels should not be considered as pressure gauges.

Always rely on the gauge at service stations or your trusted tyre fitter. If the TPMS warning light comes on, one or more tyres may be below the reference pressure.

In this case, check and inflate all tyres to the correct pressure if necessary. To reset the system, you may need to drive for a while before the light turns off.


Updated on 1 June 2026 by ScegliAuto


Related tutorials

Resetting the Tyre Pressure Warning Light on Jeep Compass
Resetting the Tyre Pressure Warning Light on Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) In this video, you can see how to reset the tyre pressure warning light on a Jeep Compass by following a few simple steps necessary for the proper fu…
How to reset the tyre pressure light on the Jeep Compass?
How to reset the tyre pressure light on the Jeep Compass?
Jeep Compass (2016-2025 / 552, MK 2) To completely eliminate the tyre pressure light from the Jeep Compass dashboard, first inflate the tyres to the correct pressure value: this value wi…
How to Reset the Tyre Pressure Warning Light on the Jeep Compass?
How to Reset the Tyre Pressure Warning Light on the Jeep Compass?
Jeep Compass (2006-2016 / MK 49, MK 1) When the tyre pressure warning light illuminates on the Jeep Compass display along with an audible signal, it means that at least one of the four tyr…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos