Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Cherokee
    4. : How to replace the serpentine belt on the Jeep Cherokee MK2

Jeep Cherokee - Video tutorial

Model: Jeep Cherokee MK 2, XJ - Years 1984-2001
Part: V-belt
Operation: How to replace the serpentine belt on the Jeep Cherokee MK2

In this video tutorial we will see how to disassemble and replace the serpentine belt of the second series Jeep Cherokee, following these simple steps. First we open the engine hood of our car and start loosening the V-belt pretensioner screw, using a socket wrench; then we remove and replace the belt with the new one, of the right type. At this point we insert the new belt correctly and turn it by hand to check the correct insertion between the various pulleys; then we screw the bolt again, tightening properly.


Posted on 13 July 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos