Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Cherokee
    4. : How to reset the oil warning light on the Jeep Cherokee

Jeep Cherokee - Video tutorial

Model: Jeep Cherokee MK 5, KL - Years 2013-2023
Part: -board computer
Operation: How to reset the oil warning light on the Jeep Cherokee

If the oil change warning light has just appeared on the on-board computer display, don't worry because it can be reset and removed in a few simple steps. Just follow the directions below. First, press the power button to turn on the car ignition. Be careful not to press the brake pedal as well. Immediately afterwards, press the accelerator pedal three times in succession. At this point the reset should have been successful. To have the definitive confirmation, all that remains is to turn off the ignition and start the car. This simple and quick operation can be repeated without problems whenever needed.


Posted on 20 July 2022 by ScegliAuto



How do you reset the Jeep Cherokee Oil Service light?
Jeep Cherokee (2013-2023 / MK 5, KL) In order to reset the Jeep Cherokee's Oil Service warning light, you need to turn the key in the appropriate cylinder, so that the instrument panel i
How to reset the oil warning light on the Jeep Cherokee
Jeep Cherokee (2008-2012 / KK, MK 4) Resetting the oil warning light on the 2010 Jeep Cherokee is very simple and takes just a few seconds to complete the entire operation correctly. Let
How to reset the oil warning light on the Jeep Cherokee
Jeep Cherokee (2013-2023 / MK 5, KL) If you have just changed the engine oil in your new Jeep Cherokee, but the warning message continues to appear on the dashboard mini display, then yo

    Frequently Asked Questions

    • Cherokee 2013-2023 - Why doesn't the Jeep Cherokee Start&Stop system work? Read Answer

How to activate the cruise control of the Nissan Qashqai

Let's see how the cruise control is activated on the Nissan Qashqai: you have to activate it by putting the cruise control switch to "on", then, using only the right spoke of the steering wheel, press the "set-" button, then the "res +" button also on the right spoke of the steering wheel and the cruise control indicator lights up on the car's instrument panel display. If the brake pedal is pressed while the cruise control is in operation or if the "cancel" button on the right spoke of the steering wheel is pressed, the cruise control will automatically deactivate and the cruise control indicator on the instrument panel will go out.

Watch the video!


by ScegliAuto

More videos