Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Wheel Bearing of the Jeep Cherokee MK2

Model: Jeep Cherokee XJ, MK 2 - Years 1984-2001
Part: Bearing

In this video tutorial, you will see the procedure necessary for removing and replacing the front wheel bearing of the second series Jeep Cherokee. First, lift the vehicle and remove the front wheel; then remove the brake caliper by unscrewing the bolts located at the rear. At this point, remove the brake disc by unscrewing the central bolt; then take off the metal retaining clip and separate the joint from the arm. Now unscrew the central bolt to remove the bearing, replacing it with the new one, following the video until the end!

Updated on 4 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the front fog lights of the Jeep Cherokee.
Replacement of the front fog lights of the Jeep Cherokee.
Jeep Cherokee (2013-2023 / KL, MK 5) Today we will discover the instructions that will allow us to disassemble and replace the front fog light bulbs of the Jeep Cherokee, in simple steps…
How to Replace the Front Headlight on a Jeep Cherokee (2001)?
How to Replace the Front Headlight on a Jeep Cherokee (2001)?
Jeep Cherokee (1984-2001 / XJ, MK 2) In today's tutorial, we will see the steps to dismantle and replace the front headlamp unit on a 2001 Jeep Cherokee MK2. First, unscrew the fixing sc…
How to Replace the Front Shock Absorber on a Jeep Cherokee
How to Replace the Front Shock Absorber on a Jeep Cherokee
Jeep Cherokee (1984-2001 / XJ, MK 2) To replace the front shock absorber on a Jeep Cherokee, loosen the bolts securing the wheel corresponding to the shock absorber being replaced. Once …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos