Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Wheel Bearing on the Jeep Wrangler

Model: Jeep Wrangler MK 1, YJ - Years 1987-1996
Part: Bearing

Today, we will see the instructions on how to remove and replace the wheel bearing on the Jeep Wrangler in simple and quick steps. First, lift the vehicle and remove the front wheel; then unscrew the two fixing screws on the front brake caliper to detach it from the disc, as shown in the video. Next, unscrew the central nut of the bearing, then use a puller to remove the bearing. Install the new original bearing and reassemble everything by applying the reverse procedure!

Updated on 4 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Wheel Bearing on the Jeep Wrangler MK3
How to Replace the Wheel Bearing on the Jeep Wrangler MK3
Jeep Wrangler (2007-2018 / MK 3, JK) Today, we will see in this video tutorial the steps to disassemble and replace the wheel bearing on the third series Jeep Wrangler. First, lift the v…
How to Replace the Starter Motor on a Jeep Wrangler
How to Replace the Starter Motor on a Jeep Wrangler
Jeep Wrangler (2007-2018 / MK 3, JK) To replace the starter motor on a Jeep Wrangler, access it from inside the wheel arch of the front right wheel. First, open the bonnet and disconnect…
How to Replace the Brake Pads on a Jeep Wrangler?
How to Replace the Brake Pads on a Jeep Wrangler?
Jeep Wrangler (1997-2007 / MK 2, TJ) The procedure for replacing the brake pads on a Jeep Wrangler is the same for both the front and rear wheels. You will need to lift the vehicle so th…

Other guides you may be interested in

How to Open the Bonnet on the Lancia Y

To open the bonnet on this vehicle, follow these simple instructions: first, open the driver's door and locate the lever positioned just below the dashboard, marked with an image of the vehicle with the bonnet open. Pull this lever towards you until you hear a "click" indicating the bonnet is released. Next, exit the cabin and stand in front of the bonnet to disengage the safety catch and complete the opening. To do this, slightly lift the bonnet, locate the yellow lever underneath, and pull it to the left to fully release and open the bonnet.

Watch the video!


by ScegliAuto

More videos