Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Wheel Speed Sensor on the Jeep Wrangler

Model: Jeep Wrangler MK 3, JK - Years 2007-2018

Today, we will see in this brief and simple guide how to remove and replace the speed sensor located behind the front wheel of the Jeep Wrangler. First, lift the vehicle and start by removing the right front wheel; then, push the piston of the brake caliper back, followed by unscrewing the caliper mounting bolts (using a 13 mm spanner), as shown in the video. Once the caliper is removed, you can take off the brake disc; unscrew and disconnect the speed sensor, following the video tutorial to the end!

Updated on 25 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the ABS Sensor on the Jeep Wrangler
How to Replace the ABS Sensor on the Jeep Wrangler
Jeep Wrangler (2007-2018 / MK 3, JK) In today's tutorial video, you will see instructions on how to remove and replace the ABS sensor on the Jeep Wrangler in simple steps. First, raise t…
How to Replace the Crankshaft Position Sensor in a Jeep Wrangler?
How to Replace the Crankshaft Position Sensor in a Jeep Wrangler?
Jeep Wrangler (1997-2007 / MK 2, TJ) In this tutorial, see how to replace the crankshaft position sensor in a Jeep Wrangler, a very simple and quick operation. Before proceeding, ensure …
How to Remove the TPMS Sensor from a Jeep Wrangler
How to Remove the TPMS Sensor from a Jeep Wrangler
Jeep Wrangler (2018-2026 / JL, MK 4) The TPMS sensor is responsible for automatically detecting the tyre pressure of the vehicle. In case of malfunction or breakage, it may be necessary …

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos