Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the ABS Sensor on the Jeep Wrangler

Model: Jeep Wrangler MK 3, JK - Years 2007-2018

In today's tutorial video, you will see instructions on how to remove and replace the ABS sensor on the Jeep Wrangler in simple steps. First, raise the vehicle and locate the ABS sensor, which is found behind the front wheel; then, use a socket wrench to undo its bolt, disconnecting the power electrical connector to remove it from its bracket, as shown in the video. Now, install the new sensor (use the original replacement); secure it with its bolt and reconnect the electrical connection!

Updated on 24 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Wheel Speed Sensor on the Jeep Wrangler
How to Replace the Wheel Speed Sensor on the Jeep Wrangler
Jeep Wrangler (2007-2018 / MK 3, JK) Today, we will see in this brief and simple guide how to remove and replace the speed sensor located behind the front wheel of the Jeep Wrangler. Fir…
How to Know the Fuse Diagram of a Jeep Wrangler
Jeep Wrangler (1987-1996 / MK 1, YJ) The fuse diagram for a Jeep Wrangler related to the box located inside the passenger compartment includes fuses assigned to: cigarette lighter, light…
How to Replace the Crankshaft Position Sensor in a Jeep Wrangler?
How to Replace the Crankshaft Position Sensor in a Jeep Wrangler?
Jeep Wrangler (1997-2007 / MK 2, TJ) In this tutorial, see how to replace the crankshaft position sensor in a Jeep Wrangler, a very simple and quick operation. Before proceeding, ensure …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos