Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the TPMS Sensor from a Jeep Wrangler

Model: Jeep Wrangler JL, MK 4 - Years 2018-2026
Part: Tire pressure warning light

The TPMS sensor is responsible for automatically detecting the tyre pressure of the vehicle. In case of malfunction or breakage, it may be necessary to replace it with a new model. However, before doing so, you must remove it from the wheel by following these instructions. First, lift the vehicle with a suitable jack and remove the wheel containing the sensor to be replaced. Unscrew the valve and let all the air out. Next, remove the tyre from the rim using a suitable tool. Once the rim is free, locate the valve again and unscrew the screw to free the TPMS sensor. At this point, the disassembly operation is complete.

Updated on 5 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Jeep Wrangler (2018-2026 / JL, MK 4) If the TPMS light related to tyre pressure illuminates on the instrument cluster of your Jeep Wrangler Mk4 and you want to reset it manually, follow …
Jeep Wrangler (2007-2018 / MK 3, JK) In today's tutorial video, you will see instructions on how to remove and replace the ABS sensor on the Jeep Wrangler in simple steps. First, raise t…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos