Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the TPMS Light on the Jeep Wrangler 4

Model: Jeep Wrangler JL, MK 4 - Years 2018-2026
Part: Tire pressure warning light

If the TPMS light related to tyre pressure illuminates on the instrument cluster of your Jeep Wrangler Mk4 and you want to reset it manually, follow the reset procedure described below. Since this is an alert light indicating one or more deflated tyres, you must inflate the tyres to the correct pressure or replace any punctured tyres. Once done, start the car and drive a few miles to allow the sensor to take a new reading and clear the alert light.

Updated on 13 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Jeep Wrangler (2018-2026 / JL, MK 4) Below we will discover how to reset the tire pressure light on the Jeep Wrangler; before resetting the TPMS sensors, it is necessary that all four ti…
Jeep Wrangler (2018-2026 / JL, MK 4) When the tire pressure warning light comes on in a Jeep Wrangler, it is necessary to adjust the pressure following the instructions given by the manu…
Jeep Wrangler (2018-2026 / JL, MK 4) To reset the TPMS light on a Jeep Wrangler, connect the OBD port to your Android or Apple phone to scan the vehicle and reset the light. Once connect…

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos