Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery in the Jeep Compass

Model: Jeep Compass MK 49, MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Battery

See other generations:
Video tutorial

Replacing your car's battery is not a very complex task, but it requires particular attention, especially regarding safety. Before proceeding to remove the old battery, ensure that the engine is off and preferably wear gloves.

Next, disconnect the two terminals by unscrewing the bolts that hold them in place, and then remove the safety block located at the bottom. At this point, simply remove the old battery and place the new model in its position.

Reconnect the two terminals starting with the negative (black) and then the positive (red). Finally, reattach the safety block.


Updated on 7 June 2026 by ScegliAuto


Related tutorials

How to replace the key battery in a Jeep Compass?
How to replace the key battery in a Jeep Compass?
Jeep Compass (2016-2025 / 552, MK 2) The YouTuber in this video shows how to change the battery in the key of his 2019 Jeep Compass, starting from the purchase phase to the final replace…
How to Replace the Key Fob Battery on the Jeep Compass
How to Replace the Key Fob Battery on the Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) In this video tutorial, you can see how easy it is to replace the battery in the key fob for the Jeep Compass. Note: if the Jeep remote is not workin…
How to Replace the Key Fob Battery on the Jeep Compass Mk1
How to Replace the Key Fob Battery on the Jeep Compass Mk1
Jeep Compass (2006-2016 / MK 49, MK 1) This guide shows how to replace the battery of the key fob on the Jeep Compass Mk1. The first step is to locate a small recess on the side of the fob…

    Frequently Asked Questions

    • Compass 2016-2025 - Why is Start & Stop no longer available in the Jeep Compass? Read answer

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos