Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Fob Battery in a Jeep Gladiator

Model: Jeep Gladiator JT - Years 2020-2026
Part: Key

The procedure for replacing the key fob battery in a Jeep Gladiator is very simple. Before proceeding, ensure you have the necessary materials: a flat CR 2450 3V battery and a small flathead screwdriver. Take the key fob from your vehicle and use the screwdriver to pry open all the side parts of the shell to access the inside. Once the shell is open, you will have access to the battery; to remove it, use the screwdriver again, prying at the edges. Proceed to extract the old battery and replace it with the new one. Close the shell by simply snapping it back together with your fingers.

Updated on 8 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Key Fob Battery in Your Jeep Gladiator
How to Replace the Key Fob Battery in Your Jeep Gladiator
Jeep Gladiator (2020-2026 / JT) In this new mini guide dedicated to your Jeep Gladiator (2020-2023), discover how to properly replace the button battery inside the key fob. First, g…
How to Replace the Key Fob Battery in the Jeep Gladiator?
How to Replace the Key Fob Battery in the Jeep Gladiator?
Jeep Gladiator (2020-2026 / JT) As shown in this tutorial, replacing the key fob battery in the Jeep Gladiator is a very simple and quick task. To do this, you will need a replaceme…
How to Replace the Key Battery for the Jeep Gladiator
How to Replace the Key Battery for the Jeep Gladiator
Jeep Gladiator (2020-2026 / JT) To replace the remote key battery, proceed as follows: take a screwdriver and pry along the seam of the remote to detach the back cover. At this poin…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos