Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Service on a Jeep Compass?

Model: Jeep Compass MK 49, MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Service warning light

See other generations:
Video tutorial

As seen in this tutorial, resetting the oil service on a Jeep Compass is an extremely simple and quick operation. Before doing this, ensure that you have completed all required scheduled maintenance tasks.

Start by entering the cabin, then insert the key, turn on the ignition, and fully press the accelerator pedal three times in quick succession. Once done, turn off the ignition, turn it back on, and check that the operation was successful.

If not, make sure to press the pedal within 10 seconds of turning on the ignition.


Updated on 17 June 2026 by ScegliAuto


Related tutorials

How to reset the service on a Jeep Compass Hybrid
How to reset the service on a Jeep Compass Hybrid
Jeep Compass (2016-2025 / 552, MK 2) In this video, we will see how to reset the service light on a 2023 Jeep Compass Hybrid. We need to go behind the steering column, where there is a s…
How to Reset the Service Light on a Jeep Compass
How to Reset the Service Light on a Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) Follow these instructions to reset the service light for the oil change maintenance on your Jeep Compass with these simple and quick steps. First, ge…
Resetting the Service Light on the Jeep Compass
Resetting the Service Light on the Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) Follow these brief steps to reset the service light for the engine oil change maintenance on the Jeep Compass. First, get inside the vehicle and turn…

    Frequently Asked Questions

    • Compass 2016-2025 - How to reset the "Service" light on a Jeep Compass? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos