Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Remote Battery on the Jeep Wrangler?

Model: Jeep Wrangler JK, MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Key

See other generations:
Video tutorial

As seen in this tutorial, replacing the remote battery on the Jeep Wrangler is an extremely simple and quick operation. You will only need a replacement battery of type CR2032 and a small flat-head screwdriver.

To open the remote, insert the tip of the screwdriver into the slot located in the bottom left corner and lever it open. Next, remove the internal cover and proceed with the battery replacement, ensuring the replacement is positioned with the negative terminal facing you. Finally, follow the reverse procedure to reassemble everything.


Updated on 24 June 2026 by ScegliAuto


Related tutorials

How to replace the battery in the Jeep Wrangler remote control.
How to replace the battery in the Jeep Wrangler remote control.
Jeep Wrangler (2018-2026 / JL, MK 4) Today we will see how to replace the battery of the Jeep Wrangler remote control. Before performing the replacement, we need to purchase a new batter…
How to Replace the Remote Battery of a Jeep Wrangler?
How to Replace the Remote Battery of a Jeep Wrangler?
Jeep Wrangler (2018-2026 / JL, MK 4) To replace the remote battery of the Jeep Wrangler, use an object to pry open the left side of the device, allowing you to completely separate the tw…
How to Replace the Remote Battery on a Jeep Wrangler
How to Replace the Remote Battery on a Jeep Wrangler
Jeep Wrangler (2018-2026 / JL, MK 4) Replacing the remote battery on a Jeep Wrangler is very simple. For this operation, you will need a replacement CR2450 3V battery and a small flathea…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos