Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear light bulbs in the Jeep Liberty?

Model: Jeep Jeep Various
Part: Tail light bulb

In this tutorial, you will see how to replace the rear light bulbs in the Jeep Liberty, a very simple and quick operation. Before proceeding, ensure the key is not inserted for safety. Start by opening the tailgate, then unscrew the fixing bolts of the light using a 10mm socket. Once done, separate the light from the body, disconnect the power connector, and using a Torx T20 key, unscrew the screws of the rear plate. At this point, you can replace the faulty bulb and follow the reverse procedure to reassemble everything.

Updated on 3 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlight Bulbs in a Jeep Liberty?
How to Replace the Headlight Bulbs in a Jeep Liberty?
Jeep Jeep Various In this tutorial, you will see how to replace the headlight bulbs in a Jeep Liberty, a very simple and quick operation. Before proceeding, ensure tha…
How to open the hood of the Jeep Liberty
How to open the hood of the Jeep Liberty
Jeep Jeep Various In today's article, we will see how to open the hood of the Jeep Liberty, a procedure that is useful in case you need to check the battery status or …
How to know the fuse diagram of a Jeep Liberty
How to know the fuse diagram of a Jeep Liberty
Jeep Jeep Various The fuse box located inside the cabin of a Jeep Liberty vehicle has fuses assigned to: horn, cigarette lighter, high beams, low beams, fog lights, tu…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos