Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Battery on the Jeep Wrangler

Model: Jeep Wrangler MK 3, JK - Years 2007-2018
Part: Battery

If you need to replace the battery on this vehicle after checking its charge state with a tester and finding it ineffective, follow the instructions provided in this description, and refer to the video images for assistance. First, open the bonnet and locate the battery on the right side. Disconnect the negative terminal first, followed by the positive terminal, then unscrew the support plates at the base and remove the battery. Position the new battery and reattach the lower support plates, then connect the positive terminal first and finally the negative terminal.

Updated on 10 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Jeep Wrangler (2007-2018 / MK 3, JK) When the key for your Jeep Wrangler third series suddenly stops working, you don’t necessarily need to buy a new one. You can solve the problem by re…
Jeep Wrangler (2007-2018 / MK 3, JK) In today's video, we will see the procedure necessary to remove and replace the battery in the Jeep Wrangler in simple and quick steps. First, open t…
Jeep Wrangler (2007-2018 / MK 3, JK) In this brief video, you can see the steps to remove and replace the battery located in the engine bay of the third generation Jeep Wrangler. First, …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos