Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Engine Light on a Jeep Renegade

Model: Jeep Renegade MK 1, BU, 520 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Warning light – error code

Video tutorial

In this video, you will learn how to reset the engine light on a Jeep Renegade. First, sit comfortably in the driver's seat and turn on the ignition without starting the engine.

While doing this, keep the brake pedal pressed. Once the dashboard lights up, check the engine warning light and begin to release the brake pedal.

At this point, press the accelerator pedal five consecutive times. If the operation is successful, you should notice that the engine light no longer appears on the dashboard.

In this case, the reset has been successful.


Updated on 22 July 2026 by ScegliAuto


Related tutorials

TPMS: How to Reset the Tyre Pressure Sensor on the Jeep Renegade
TPMS: How to Reset the Tyre Pressure Sensor on the Jeep Renegade
Jeep Renegade (2014-2024 / ) On the Jeep Renegade, resetting the TPMS is done after adjusting the pressures according to the chart on the door pillar. With the Jeep Renegade stat…
How to Reset the TPMS Light on a Jeep Renegade
How to Reset the TPMS Light on a Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) To reset the TPMS light on a Jeep Renegade, first ensure that the pressure of all tyres is correct according to the manufacturer's specifications. Tu…
How to Reset the Oil Change Light on a Jeep Renegade?
How to Reset the Oil Change Light on a Jeep Renegade?
Jeep Renegade (2014-2021 / ) Resetting the oil change light on a Jeep Renegade is very simple. Follow this procedure only after changing the oil and the corresponding filter. To …

Other guides you may be interested in

    Frequently Asked Questions

    • Jeep Renegade 2014-2021 - How to reset the Uconnect system in the Jeep Renegade? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos