Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Grand Cherokee
    4. : How to reset the service on the Jeep Grand Cherokee.

Jeep Grand Cherokee - Video tutorial

Model: Jeep Grand Cherokee MK 4, WK2 - Years 2010-2021
Part: Instrument cluster
Operation: How to reset the service on the Jeep Grand Cherokee.

In today's video, we will see how to reset the service light in the Jeep Grand Cherokee. First of all, we remind you to perform proper maintenance on your vehicle so that you can always keep your vehicle in full efficiency. Once this is done, we can proceed with resetting the parameter. We turn on the vehicle's instrument panel, then press the accelerator pedal three times. At this point, we turn off the car. After a few seconds of waiting, we can proceed with turning on the car and we will see that the desired parameter has been reset and therefore the light will no longer be on.


Posted on 17 June 2023 by ScegliAuto

    Frequently Asked Questions

    • Grand Cherokee 1998-2004 - Where is the brightness control for the instrument panel of the Jeep Grand Cherokee Mk2 located? Read Answer
    • Grand Cherokee 2004-2010 - What does the 2007 Jeep Grand Cherokee oil light mean? Read Answer
    • Grand Cherokee 2010-2021 - What does the ETC light on the Jeep Grand Cherokee indicate? Read Answer
    • Grand Cherokee 2004-2010 - What does the red engine light on the Jeep Grand Cherokee mean? Read Answer
    • Grand Cherokee 2004-2010 - What does the lightning spy mean in a Jeep Grand Cherokee? Read Answer
    • Grand Cherokee 2004-2010 - What do the spies on the Jeep Grand Cherokee represent? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos