Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Jeep Grand Cherokee

Model: Jeep Grand Cherokee WK2, MK 4 - Years 2010-2021
Part: Service warning light

To reset the service light on a Jeep Grand Cherokee, turn on the ignition. Use the buttons located near the steering wheel (control levers) to enter the settings menu. Scroll through the options until you find the service maintenance setting. Select the maintenance reset you wish to perform using the appropriate buttons, then exit the menu. Check the display on the dashboard above the instrument cluster by turning it off and on again with the ignition key.

Updated on 12 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on the Jeep Grand Cherokee
How to Reset the Service Light on the Jeep Grand Cherokee
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) In today's video, we will see how to reset the service light on the Jeep Grand Cherokee. First, remember to carry out the correct maintenance on your…
How to reset the Service light on a Jeep Grand Cherokee?
How to reset the Service light on a Jeep Grand Cherokee?
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) To reset the Service light on a Jeep Grand Cherokee, press the ignition button after inserting the key to turn on the dashboard without starting the …
Resetting the Service Light on a Jeep Grand Cherokee
Resetting the Service Light on a Jeep Grand Cherokee
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) Below are the steps necessary to reset the service light for routine maintenance on a Jeep Grand Cherokee. First, get in the vehicle and start the in…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos