Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Service in a Jeep Compass?

Model: Jeep Compass MK 1, MK 49 - Years 2006-2016
Part: Service warning light

This tutorial shows how to reset the oil service in a Jeep Compass, a very simple and quick operation to perform only after completing the required scheduled maintenance. Start by entering the cabin, then insert the key and turn on the instrument cluster, not the engine. Once done, press the accelerator pedal fully three times in quick succession, restart the cluster, and check that the operation was successful. If not, repeat the procedure, ensuring it is completed within about 10 seconds.

Updated on 3 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Resetting the service light on the Jeep Compass.
Resetting the service light on the Jeep Compass.
Jeep Compass (2016-2025 / 552, MK 2) Through these brief steps, we will see how to reset the service light for the regular maintenance of the engine oil change of the Jeep Compass. First…
How to Reset the Service Light on a Jeep Compass
How to Reset the Service Light on a Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) Follow these instructions to reset the service light for the oil change maintenance on your Jeep Compass with these simple and quick steps. First, ge…
How to reset the service light on the Jeep Compass
How to reset the service light on the Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) The red oil warning light on a Jeep Compass vehicle must be reset after replacing the old engine oil with new oil. To reset the warning light, we mus…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos