Do it yourself
Frequently asked questions about cars and motorcycles

How the Safety Systems of the Jeep Compass Work

Model: Jeep Compass 552, MK 2 - Years 2016-2025
Part: Instrument cluster

Let's see how the safety systems of the Jeep Compass work. First, turn on the instrument cluster. From the infotainment system, access the 'Settings' menu at the bottom, then the 'Safety' submenu, and then 'Driver Assistance'. By clicking the arrow in the top right, you can access the emergency braking feature, which can be disabled or set to only sound an alert or activate both the alert and emergency braking. You can also adjust the sensitivity of the sensor: close, medium, or far; this depends on your reflex response. Now, let's look at the 'Lane Sense' which detects a shift from the lane without indicating. In this case, the vehicle vibrates the steering wheel and emits an audible warning. From the screen, it can be set according to your preferences. The system can be turned off by pressing the button in the bottom right of the four-way indicator button. When the light is on, the system is off. A warning also appears on the instrument cluster. From the same Lane Sense menu, you can also set some preferences regarding the parking sensors and the rear camera.

Updated on 7 August 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Jeep Compass (2016-2025 / 552, MK 2) In today's video, we will see how to reset the lane keeping assist system (and this generally applies to all ADAS systems) in the Jeep Compass. This …
Jeep Compass (2016-2025 / 552, MK 2) This video shows how to reset the front collision systems and pedestrian presence warning on a Jeep Compass LTD. The system may reset automatically a…
Jeep Compass (2006-2016 / MK 1, MK 49) How to activate or deactivate the Cruise Control on a Jeep Compass? Follow the video. Enter the cabin, turn on the instrument cluster, and press the …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos