Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Service on a Jeep Renegade?

Model: Jeep Renegade 520, MK 1, BU - Years 2014-2026
Part: Service warning light

Resetting the oil service on a Jeep Renegade is a straightforward and quick operation. First, ensure you have completed all scheduled maintenance tasks. Start by entering the cabin, then turn on the ignition and press the accelerator pedal down. Next, press the brake pedal fully seven times in succession, keeping the accelerator pressed for at least 60 seconds. Release the accelerator and restart the vehicle. If done correctly, the service will be reset.

Updated on 7 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Light on a Jeep Renegade
How to Reset the Oil Light on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) Before you start, sit in the driver's seat of your Jeep Renegade. Begin by pressing the vehicle's ignition button once to activate the instrument clu…
How to Reset Oil Service on a Jeep Renegade
How to Reset Oil Service on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) .. Here’s how to reset the oil service on a Jeep Renegade. This is a very simple operation: enter the vehicle and t.. …
Resetting the service light on a 2016 Jeep Renegade
Resetting the service light on a 2016 Jeep Renegade
Jeep Renegade (2014-2021 / ) The video shows how to reset the service light on a 2016 Jeep Renegade. It is a very simple DIY operation that takes just a few minutes. It should be…

    Frequently Asked Questions

    • Jeep Renegade 2014-2026 - Why did the oil change light come on in the Jeep Renegade? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos