Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Service Light on the Jeep Grand Cherokee?

Model: Jeep Grand Cherokee WK2, MK 4 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Service warning light

See other generations:
Video tutorial

To reset the Oil Service light on the Jeep Grand Cherokee, press the accelerator pedal while the instrument cluster is off: once you hold down the pedal, insert the ignition key into the ignition switch, turning it to power on the instrument cluster.

At this point, press the brake pedal three times while continuing to hold down the accelerator; once this operation is complete, release the pedals, turn off and then turn on the cluster again to check that the light has been reset.


Updated on 24 August 2026 by ScegliAuto


Related tutorials

How to reset the "Service" light on a Jeep Grand Cherokee?
How to reset the "Service" light on a Jeep Grand Cherokee?
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) To reset the "Service" light on a Jeep Grand Cherokee, start by turning on the instrument panel without starting the engine. Use the buttons on the s…
How to Reset the Service Light on a Jeep Grand Cherokee?
How to Reset the Service Light on a Jeep Grand Cherokee?
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) To reset the Service light on a Jeep Grand Cherokee, press the appropriate ignition button after inserting the key to turn on the instrument panel wi…
How to Reset the Service Light on the Jeep Grand Cherokee?
How to Reset the Service Light on the Jeep Grand Cherokee?
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) The Service light that will appear on the instrument cluster of the Jeep Grand Cherokee can be reset by pressing the ignition button after inserting …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos