Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Service Light on a Jeep Renegade?

Model: Jeep Renegade 520, MK 1, BU - Years 2014-2026
Part: Service warning light

To reset the Oil Service light on a Jeep Renegade, turn on the instrument panel without starting the engine: at this point, press and release the accelerator pedal five times. After this operation, you can start the engine using the ignition button: this will confirm that the Service light will no longer appear on the instrument panel. Therefore, once the operation is complete, you can completely turn off the instrument panel, as the reset procedure will be finished.

Updated on 27 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Jeep Renegade?
How to Reset the Service Light on a Jeep Renegade?
Jeep Renegade (2014-2026 / 520, MK 1, BU) To reset the Service light on a Jeep Renegade, turn the ignition key to power on the instrument cluster and check for the maintenance light. Press an…
How do you reset the tire pressure warning light on the Jeep Renegade?
How do you reset the tire pressure warning light on the Jeep Renegade?
Jeep Renegade (2014-2026 / 520, MK 1, BU) To reset the tire pressure warning light of the Jeep Renegade, you need to inflate the tires until they reach the recommended pressure value: this va…
How do you reset the Service light in the Jeep Renegade?
How do you reset the Service light in the Jeep Renegade?
Jeep Renegade (2014-2026 / 520, MK 1, BU) The Jeep Renegade is no exception, every certain number of kilometers traveled, or every certain interval of time, must undergo maintenance. It is a …

Other guides you may be interested in

    Frequently Asked Questions

    • Jeep Renegade 2014-2026 - Why did the oil change light come on in the Jeep Renegade? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos