Do it yourself
| ||||
|
Jeep Renegade - Video tutorial
Model: Jeep Renegade
520, BU, MK 1
- Years 2014-2023 In order to reset the Jeep Renegade's Oil Service warning light, it is necessary to eliminate the used oil in the engine and replace it with an oil with the right characteristics. When topping up, it will be necessary to go inside the passenger compartment and turn on the instrument panel. Once switched on, the accelerator pedal must be depressed five times and then the brake pedal must be depressed. Once finished, the error code will have been cleared. To verify the correct reset of the warning light, it will be possible to turn off the car and turn it on again.
Posted on 23 February 2024 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to replace the Ford Transit key batteryBelow I will explain how to replace the remote control key battery on the car, take a small screwdriver and pry the rear part of the remote control, (where there is the ring), at which point unhook the back cover and yes will have access to the compartment containing the battery. Always with the help of the small screwdriver, proceed to make the va and lift the battery out of the housing. Then take the new battery (check the type) and place it on the housing, always making sure to position it with the positive pole facing upwards. Finally, close the back cover by re-hooking it to the key. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.028
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |