Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Engine Oil Light (Service) on the Jeep Renegade

Model: Jeep Renegade 520, MK 1, BU - Years 2014-2026
Part: Service warning light

In this short video, you will see how to reset the service light for the regular maintenance oil change on a 2018 Jeep Renegade, following the instructions below. First, get inside the vehicle and turn on the ignition by pressing the start button; then press the accelerator pedal five times before starting the vehicle again by pressing the button, as shown in the video. Next, you will see the engine oil message appear on the display; this way, you will have successfully reset the mileage before the next maintenance!

Updated on 20 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Resetting the Service Light on the Jeep Renegade
Resetting the Service Light on the Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) Today, see how to reset the service light for routine maintenance on the Jeep Renegade in simple steps. First, get inside the vehicle and connect you…
How to Reset the Service Light on a Jeep Renegade
How to Reset the Service Light on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) The procedure required to correctly complete the manual reset of the service light on your Jeep Renegade (2014-2022) is very simple and takes just a …
How to Reset the Service Warning on Jeep Renegade
How to Reset the Service Warning on Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) You can remove the service warning from the dashboard of your Jeep Renegade using a manual procedure without external tools. It is advisable to do th…

Other guides you may be interested in

    Frequently Asked Questions

    • Jeep Renegade 2014-2026 - Why did the oil change light come on in the Jeep Renegade? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos