Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Grand Cherokee
    4. : Where is the battery located in the Jeep Grand Cherokee?

Jeep Grand Cherokee - Video tutorial

Model: Jeep Grand Cherokee MK 4, WK2 - Years 2010-2021
Part: Battery
Operation: Where is the battery located in the Jeep Grand Cherokee?

In this video, we can see where the battery is located in the Jeep Grand Cherokee and how to proceed in case we need to replace it. As shown, the battery is not positioned in the classic engine compartment housing but rather inside the passenger cabin, below the passenger seat. To access it and subsequently remove it, we first open the right doors, then move the seat completely forward and lift the indicated panel. Next, we disconnect both terminals starting with the negative one, unscrew the lower fixing bolt, and install the replacement following the reverse procedure.


Posted on 17 November 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Grand Cherokee 2004-2010 - Where is the battery located on the Jeep Grand Cherokee 3? Read Answer
    • Grand Cherokee 2004-2010 - Where is the battery of the Jeep Grand Cherokee Mk3 located? Read Answer
    • Grand Cherokee 2010-2021 - What is the location of the battery in the Jeep Grand Cherokee? Read Answer
    • Grand Cherokee 2010-2021 - Where is the battery of the Jeep Grand Cherokee? Read Answer
    • Grand Cherokee 2010-2021 - Where is the battery located in the Jeep Grand Cherooke? Read Answer
    • Grand Cherokee 2010-2021 - Where is the Jeep Grand Cherokee battery located? Read Answer
    • Grand Cherokee 1998-2004 - Where is the battery located in the Jeep Grand Cherokee? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos