Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Jeep Renegade?

Model: Jeep Renegade 520, MK 1, BU - Years 2014-2026
Part: Service warning light

To reset the Service light on the Jeep Renegade, first drain the old oil from the engine and replace it with oil of the correct specifications. After topping up, enter the cabin and turn the ignition key to switch on the instrument panel. Once on, press the accelerator pedal five times, then press the brake pedal. After completing this operation, the error code will be cleared, and to verify the correct reset of the light, switch off the vehicle and turn it back on.

Updated on 4 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the "Service" Light on a Jeep Renegade
How to Reset the "Service" Light on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) Before you can begin, sit in the driver's seat of your Jeep Renegade. Start by activating the instrument cluster by turning the key in the ignition b…
How to Reset the "Service" Light on a Jeep Renegade
How to Reset the "Service" Light on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) Before you can begin, sit in the driver's seat of your Jeep Renegade. Start by pressing the vehicle's ignition button, which will turn on the instrum…
How to Reset the "Service" Light on a Jeep Renegade
How to Reset the "Service" Light on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) Start by ensuring that the service has been completed, then sit in the driver's seat of your Jeep Renegade. Once seated, press the ignition button on…

Other guides you may be interested in

    Frequently Asked Questions

    • Jeep Renegade 2014-2026 - Why did the oil change light come on in the Jeep Renegade? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos