Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Compass
    4. : How to replace the battery of the Jeep Compass key.

Jeep Compass - Video tutorial

Model: Jeep Compass MK 2, 552 - Years 2016-2024
Part: Key
Operation: How to replace the battery of the Jeep Compass key.

Replacing the battery of a Jeep Compass key is an operation that follows very simple steps to be performed independently. The first step is to remove the metal key stored inside the shell, to do this you will have to press the button on the remote control. The second step is to insert the key itself into the slot from which it was removed and lever it outwards to open the remote control. The third step is to remove the battery from the remote control. The fourth step is to insert the new battery. The fifth step is to close the remote control, aligning the parts. The sixth step is to insert the key back into the shell.


Posted on 6 January 2024 by ScegliAuto

    Frequently Asked Questions

    • Compass 2006-2016 - Why is the Jeep Compass key not recognized? Read Answer
    • Compass 2016-2025 - Why is the Jeep Compass key not detected? Read Answer
    • Compass 2016-2025 - Can the Jeep Compass be turned on with the electronic key discharged? Read Answer
    • Compass 2016-2025 - How does the Jeep Compass key work? Read Answer
    • Compass 2016-2025 - Why does the Jeep Compass not recognize the key? Read Answer
    • Compass 2006-2016 - Why does the Jeep Compass not detect the electronic key? Read Answer
    • Compass 2016-2025 - How to replace the key battery of a Jeep Compass? Read Answer
    • Compass 2006-2016 - How to replace the key battery of a Jeep Compass? Read Answer

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos