Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Compass
    4. : How to replace the battery of the Jeep Compass

Jeep Compass - Video tutorial

Model: Jeep Compass MK 1, MK 49 - Years 2006-2016
Part: Battery
Operation: How to replace the battery of the Jeep Compass

The battery of the Jeep Compass is located inside the front hood, just below the windshield, under a protective cover. In case of need, it may be necessary to replace the battery independently. The steps to follow are:
- Open the hood.
- Remove the cover.
- Unscrew the pins that hold it in place.
- Disconnect the terminals, first the positive and then the negative one.
Once removed, you can insert the new battery.
- Insert the new battery.
- Connect the terminals, first the negative and then the positive one.
- Screw the pins.
- Close the cover.
- Close the hood.
It may be necessary to restart the radio using an unlock code.


Posted on 8 January 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Compass 2006-2016 - Where do Jeep Compass battery problems come from? Read Answer
    • Compass 2016-2025 - What to do when the Jeep Compass does not start? Read Answer
    • Compass 2016-2025 - If the message Start & Stop not available on the Jeep Compass appears, what to do? Read Answer
    • Compass 2016-2025 - What problems does the Jeep Compass battery have? Read Answer
    • Compass 2016-2025 - Why is Start & Stop no longer available in the Jeep Compass? Read Answer

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos