Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Grand Cherokee
    4. : How do you replace the battery of the Jeep Grand Cherokee remote control?

Jeep Grand Cherokee - Video tutorial

Model: Jeep Grand Cherokee MK 4, WK2 - Years 2010-2021
Part: Key
Operation: How do you replace the battery of the Jeep Grand Cherokee remote control?

In order to replace the battery of the Jeep Grand Cherokee remote control, you need to press the button located on the top of the device, so that the key can be removed from the inside. Once the key has been removed, it can be used to pry open the back cover of the remote control; at this point, the battery can be located, removed from its housing, and replaced with a new one. After the replacement, the remote control can be closed, and it should be checked that everything is functioning correctly.


Posted on 28 January 2024 by ScegliAuto

    Frequently Asked Questions

    • Grand Cherokee 2004-2010 - How much does it cost to duplicate the key of the Jeep Gran Cherokee? Read Answer
    • Grand Cherokee 2010-2021 - How many batteries does the Jeep Grand Cherokee remote control have? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos