Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Fuel Cap and Cover on the Jeep Wrangler

Model: Jeep Wrangler JK, MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Fuel cap

See other generations:
Video tutorial

This guide provides instructions for dismantling and replacing the fuel cap and flap on the Jeep Wrangler. First, move to the exterior of the vehicle and begin by removing the left rear light; then unscrew the internal screws of the fuel cap cover to remove it, as shown in the video.

At this point, remove and replace the fuel cap by installing the new one; reassemble the fuel cap cover and finally the rear light, applying the reverse procedure of dismantling!


Updated on 16 September 2026 by ScegliAuto


Related tutorials

Jeep Wrangler (2018-2026 / JL, MK 4) In this brief guide, you will find the main instructions for disassembling and replacing the fuel cap lock cylinder on the Jeep Wrangler. First, open…
Jeep Wrangler (2007-2018 / JK, MK 3) Below we will discover the instructions that will show us how to open the fuel tank cap of the Jeep Wrangler, in simple and quick steps. First, let's…
…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos