Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to open the fuel tank cap of the Jeep Wrangler

Model: Jeep Wrangler MK 3, JK - Years 2007-2018
Part: Fuel cap

Below we will discover the instructions that will show us how to open the fuel tank cap of the Jeep Wrangler, in simple and quick steps. First, let's move to the outer part with the ignition key, then insert it into the fuel tank cap; turn it a quarter turn to unlock the cap lock, unscrewing it to remove it, as shown in the video. At this point, it will be possible to refuel, finally screwing the fuel tank cap and turning the key in the opposite direction to lock the lock again.

Posted on 19 October 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Fuel Cap Lock Cylinder on the Jeep Wrangler
Replacing the Fuel Cap Lock Cylinder on the Jeep Wrangler
Jeep Wrangler (2018-2026 / JL, MK 4) In this brief guide, you will find the main instructions for disassembling and replacing the fuel cap lock cylinder on the Jeep Wrangler. First, open…
How to Check the Power Steering Fluid Level on a Jeep Wrangler
How to Check the Power Steering Fluid Level on a Jeep Wrangler
Jeep Wrangler (2007-2018 / MK 3, JK) To check the power steering fluid level, proceed as follows: 1) Open the front bonnet, ensuring it is secured with its support. 2) Locate the power s…
Replacing the Fuel Cap and Cover on the Jeep Wrangler
Replacing the Fuel Cap and Cover on the Jeep Wrangler
Jeep Wrangler (2007-2018 / MK 3, JK) This guide provides instructions for dismantling and replacing the fuel cap and flap on the Jeep Wrangler. First, move to the exterior of the vehicle…

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos