Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a 2021 Jeep Compass

Model: Jeep Compass 552, MK 2 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Service warning light

See other generations:
Video tutorial

This video illustrates how to reset the maintenance light on a 2021 Jeep Compass. The procedure is simple, takes less than 1 minute to perform, and requires no special tools or software.

To reset, simply start the cluster without starting the engine by pressing the ignition button once. When the cluster is on, press the accelerator pedal fully three times, then restart the cluster.

The procedure will now be complete, and no messages will appear on the cluster.


Updated on 9 October 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Jeep Compass
How to Reset the Service Light on a Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) After completing all routine maintenance tasks such as oil change, coolant replacement, filter changes, and tyre checks, you can proceed to reset the…
How to Reset the Service Light on a Jeep Compass?
How to Reset the Service Light on a Jeep Compass?
Jeep Compass (2016-2025 / 552, MK 2) To reset the Service light on a Jeep Compass, start by turning on the ignition to check that the light is present on the instrument cluster. Once the…
How to Reset the Service Light on a Jeep Compass?
How to Reset the Service Light on a Jeep Compass?
Jeep Compass (2016-2025 / 552, MK 2) To reset the service light on a Jeep Compass, connect a diagnostic tool to the vehicle's OBD port, located just below the steering column. Once conne…

    Frequently Asked Questions

    • Compass 2016-2025 - How to reset the "Service" light on a Jeep Compass? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos