Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light on the Jeep Cherokee?

Model: Jeep Cherokee KL, MK 5 - Years 2013-2023
Part: Service warning light

To reset the Service light of the Jeep Cherokee, you need to insert the ignition key into the slot and turn it to start the dashboard: once it has been turned, you can proceed by pressing the accelerator pedal three times all the way down. After this operation has been done three times, you need to wait a few seconds until the light has been reset; at the end of the reset procedure, you can turn off the dashboard and turn it back on to confirm that the reset has been successful.

Posted on 13 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the Service light on the Jeep Cherokee?
How do you reset the Service light on the Jeep Cherokee?
Jeep Cherokee (2013-2023 / KL, MK 5) To completely make the Service light disappear from the instrument panel of the Jeep Cherokee, you will need to insert the ignition key into the corr…
How to Reset the Service Light on a Jeep Cherokee?
How to Reset the Service Light on a Jeep Cherokee?
Jeep Cherokee (2013-2023 / KL, MK 5) To reset the Service light on the Jeep Cherokee, insert the ignition key, turning it in the ignition switch, and then press the button to start the i…
How do you reset the Service light on the Jeep Cherokee?
How do you reset the Service light on the Jeep Cherokee?
Jeep Cherokee (2013-2023 / KL, MK 5) In order to reset the Service light of the Jeep Cherokee, you need to insert the ignition key into the corresponding slot: once the dashboard is turn…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos