Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the cabin air filter of the Kia Xceed

Model: Kia Xceed MK 1 - Years 2019-2026
Part: Cabin air filter

The following video tutorial illustrates the steps to follow to independently replace the cabin air filter on a Kia Xceed vehicle. The cabin air filter on Kia vehicles is located behind the passenger side glove compartment. To replace the air filter, we need to open the glove compartment and release the opening by pressing on the side. Immediately after, we remove the air filter cover to access the box. We remove the filter and clean the housing. After inserting the new filter, we close the box cover and reassemble the glove compartment.

Posted on 5 November 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service in the KIA XCeed?
How to reset the service in the KIA XCeed?
Kia Xceed (2019-2026 / MK 1) In this tutorial, we will see how to reset the service indicator in the KIA XCeed, a very simple and quick operation to be performed only after compl…
How to Reset the Service in the KIA XCeed?
How to Reset the Service in the KIA XCeed?
Kia Xceed (2019-2026 / MK 1) In this tutorial, you will see how to reset the service in the KIA XCeed, an extremely simple and quick operation to perform only after completing al…
How to reset the tire pressure sensor on the Kia Xceed
How to reset the tire pressure sensor on the Kia Xceed
Kia Xceed (2019-2026 / MK 1) Today's procedure will show us how to reset the tire pressure warning light on the Kia Xceed; before performing the reset, it is necessary for all fo…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos