Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Original Tweeter with an Aftermarket One

Model: Kia Soul MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Speaker

See other generations:
Video tutorial

The tweeter is located beneath the side air vent on the dashboard: use a plastic lever to detach the vent, but do not attempt to remove it immediately as there is a fixing screw under the cover grille of the tweeter housing; therefore, detach the grille and unscrew the fixing screw of the vent to remove it completely.

At this point, unscrew the fixing screws of the tweeter and cut the power wires of the tweeter itself to use the bracket for installing a new one. Fit the new tweeter into the bracket, then solder the wires of the original connector using a capacitor.


Updated on 7 February 2026 by ScegliAuto


Related tutorials

Replacing the Boot Light Bulb
Replacing the Boot Light Bulb
Kia Soul (2008-2014 / MK 1) To replace the bulb in the boot, use a plastic lever to detach the translucent cover of the lamp holder and access the tubular type bulb: if the orig…
Replacement of Front Grille
Replacement of Front Grille
Kia Soul (2008-2014 / MK 1) Obtain a replacement grille identical to the original. The disassembly process is very simple and easy without the need for special tools, making it …
Replacing the Cabin Pollen Filter
Replacing the Cabin Pollen Filter
Kia Soul (2008-2014 / MK 1) The pollen filter purifies the air in the cabin and is located under the passenger side glove compartment. Obtain a pollen filter that matches the or…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos