Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Clutch Cable on the Kia Picanto Mk1

Model: Kia Picanto MK 1, 2A - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Clutch

See other generations:
Video tutorial

This guide shows how to replace the clutch cable on the Kia Picanto Mk1. The first step is to remove the lower dashboard panel from the driver's side. Next, unscrew the fixing clip of the air filter box sleeve, remove the filter and the box by unscrewing the fixing screws.

After removing the battery, you can unscrew the 12mm fixing bolts of the cable on the bulkhead. From the clutch pedal, unscrew the 14mm bolt and disconnect the end of the clutch cable.

From the engine bay, pull out the cable after detaching it from the support hook. From the transmission, disconnect the other end of the cable.

Installing the new clutch cable is straightforward as you simply reverse the disassembly steps.


Updated on 27 April 2026 by ScegliAuto


Related tutorials

Replacing the Clutch Cable on the Kia Picanto
Replacing the Clutch Cable on the Kia Picanto
Kia Picanto (2011-2018 / TA, MK 2) The instructions in this guide will illustrate how to remove and replace the clutch cable on the Kia Picanto. First, open the vehicle's bonnet and lo…
How to Remove and Replace the Clutch Cable on a Kia Picanto
How to Remove and Replace the Clutch Cable on a Kia Picanto
Kia Picanto (2011-2018 / TA, MK 2) Today, we will go through the main instructions on how to remove the clutch cable from a Kia Picanto. First, open the bonnet of the vehicle and locat…
How to Adjust the Clutch Cable on a Kia Picanto
How to Adjust the Clutch Cable on a Kia Picanto
Kia Picanto (2004-2011 / MK 1, 2A) This guide provides the main instructions on how to adjust the clutch cable on a Kia Picanto. First, open the bonnet and locate the clutch cable situ…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos