Do it yourself
Frequently asked questions about cars and motorcycles

Oil Change in a Manual Gearbox

Model: Kia Rio DC, MK 1 - Years: 2000, 2001, 2002, 2003, 2004, 2005
Part: Transmission

See other generations:
Video tutorial

This guide shows how to change the oil in a manual gearbox. Ensure you use all the appropriate tools safely.

Be careful not to remove the plug while the fluid is still hot, as you could get burned. Lift the vehicle to ensure a visual inspection for any transmission leaks.

Once you locate the drain plug, loosen it with a spanner, position a container underneath the gearbox, clean, and then remove the plug. Finally, use a pump to add new gearbox oil into the filling hole.


Updated on 10 February 2026 by ScegliAuto


Related tutorials

Kia Rio (2000-2005 / DC, MK 1) Lift the vehicle on the ramp. Unscrew the oil cap located on the gearbox sump and let it drain into a suitable container. Add the flushing additive a…
Kia Rio (2000-2005 / DC, MK 1) It is recommended to carry out this repair only if you have good mechanical knowledge, as it requires disassembling the gearbox and installing the ki…
Kia Rio (2000-2005 / DC, MK 1) Lift the car with suitable jacks and secure it with appropriate supports to prevent it from falling. Remove the front wheels for easier access. Place…

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos